HP P2000 G3, Справочное руководство CLI

Страница: 71 / 532

HP P2000 G3 MSA System CLI Reference Guide 71
create volume-set
Description Creates a specified number of volumes in a vdisk. You must specify a base name and a size for the
volumes. You can create the volumes unmapped or set their default mapping. Default mapping
settings apply to all hosts, unless overridden by an explicit mapping between a host and the volume.
You can later change mappings by using the map volume and unmap volume commands.
By default, this command will not map the created volumes.
Syntax
create volume-set
vdisk vdisk
basename base-name
count #
size size [B|KB|MB|GB|TB|KiB|MiB|GiB|TiB]
[baselun base-LUN ]
[access read-write|rw|read-only|ro|no-access]
[ports ports ]
Parameters
vdisk vdisk
Name or serial number of the vdisk to create the volumes in. For vdisk syntax, see Command syntax
on page 22.
basename base-name
A name to which a number will be appended to generate a different name for each volume. A name
is case sensitive; cannot include a comma, double quote, left angle bracket, or backslash; and can
have a maximum of 16 bytes. A name that includes a space must be enclosed in double quotes.
Resulting volumes are numbered sequentially starting with 000. If volumes with the specified
basename already exist, names of new volumes start with the first available name in the sequence.
For example: for basename
vd1_v
, if
vd1_v000
and
vd1_v002
exist, the next volumes created
will be
vd1_v001
and
vd1_v003
.
count #
The number of volumes to create, from 1 to 128. Volumes are created up to the maximum number
supported per vdisk.
size size [B|KB|MB|GB|TB|KiB|MiB|GiB|TiB]
Sets the size for each volume using the current base, as shown by the show cli-parameters command.
The unit can be specified as follows:
• If base 2 is in use:
B
(bytes),
KiB
(kibibytes),
MiB
(mebibytes), or
GiB
(gibibytes).
• If base 10 is in use:
B
(bytes),
KB
(kilobytes),
MB
(megabytes), or
GB
(gigabytes).
If no unit is specified, the unit is 512-byte blocks. If the combined size of the volumes exceeds the
capacity of the vdisk, an error message is displayed and no volumes are created.
baselun base-LUN
Optional. The first in a sequence of LUNs to assign to map the volumes through ports specified by
the
ports
parameter. If the
baselun
and
ports
parameters are omitted, the volumes are not
mapped. If a LUN to be assigned to a volume is already in use, an error message is displayed and
that volume and any subsequent volumes are not mapped.
access read-write|rw|read-only|ro|no-access
Optional. Access privilege that hosts have to these volumes: read-write (
rw
), read-only (
ro
), or
no-access. If
no-access
is specified, the volume is not mapped. The default is
read-write
.
ports ports
Optional. The controller ports through which hosts can access the volumes using LUNs specified by
the
baselun
parameter. For port syntax, see Command syntax on page 22. If not all ports are
specified, the unspecified ports are not mapped. If the
ports
and
baselun
parameters are
omitted, the volumes are not mapped.