HP P2000 G3 Скачать руководство пользователя страница 473

Страница: 473 / 532

HP P2000 G3 MSA System CLI Reference Guide 473

shareddata

string

Amount of preserved and write data that is shared between this snapshot and

other snapshots.

shareddata-

numeric

string

Unformatted

shareddata

value in 512-byte blocks.

priority-value

string

Retention priority for the snapshot, based on the snapshot attributes and the

user-defined retention priority for the snapshot type.

•

0x2000

: Queued snapshot. The snapshot was taken for remote replication

but is queued, waiting for a previous replication to complete.

•

0x4000

: Replication snapshot.

•

0x6000

: Standard snapshot.

•

0x8000

: Common sync point. The latest snapshot that is copy-complete on

all secondary volumes.

•

0xa000

: Volume-copy snapshot. Snapshot that is being used to copy data

from a source volume to a destination volume.

•

0xc000

: Replicating snapshot. Snapshot that is being replicated from a

primary system to a secondary system.

•

0xe000

: Only sync point. The snapshot is the only sync point that is

available on any secondary volume.

user_priority-

value

string

User-defined retention priority for the snapshot type.

snapshot-type

string

Snapshot type.

•

Standard snapshot

: Snapshot of a master volume that consumes a

snapshot license.

•

Standard snapshot(DRM)

: A temporary standard snapshot created

from a replication snapshot for the purpose of doing a test failover for

disaster recovery management (DRM).

•

Replication snapshot

: For a primary or secondary volume, a

snapshot that was created by a replication operation but is not a sync point.

•

Replication snapshot(Replicating)

: For a primary volume, a

snapshot that is being replicated to a secondary system.

•

Replication snapshot(Current sync point)

: For a primary or

secondary volume, the latest snapshot that is copy-complete on any

secondary system in the replication set.

•

Replication snapshot(Common sync point)

: For a primary or

secondary volume, the latest snapshot that is copy-complete on all

secondary systems in the replication set.

•

Replication snapshot(Old Common sync point)

: For a primary

or secondary volume, a common sync point that has been superseded by a

new common sync point.

•

Replication snapshot(Only sync point)

: For a primary or

secondary volume, the only snapshot that is copy-complete on any

secondary system in the replication set.

•

Replication snapshot(Queued)

: For a primary volume, a snapshot

associated with a replication operation that is waiting for a previous

replication operation to complete.

•

Replication snapshot(Awaiting replicate)

: For a primary

volume, a snapshot that is waiting to be replicated to a secondary system.

Table 74

snapshots properties (continued)

Name

Type

Description

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Бренды по названию

Популярные бренды