HP P2000 G3 Скачать руководство пользователя

Страница: 57 / 532

HP P2000 G3 MSA System CLI Reference Guide

create schedule

Description

Schedules a task to run automatically.
When scheduling

ReplicateVolume

tasks, a best practice is to schedule no more than three

volumes to start replicating at the same time, and for those replications to recur no less than 60

minutes apart. If you schedule more replications to start at the same time, or schedule replications to

start more frequently, some scheduled replications may not have time to complete.

Syntax

create schedule

schedule-specification "

specification

task-name

task-name

schedule-name

Parameters

schedule-specification "

specification

Defines when the task will first run, and optionally when it will recur and expire. You can use a

comma to separate optional conditions. Dates cannot be in the past. For times, if neither

nor

is specified, a 24-hour clock is used.

•

start

yyyy-mm-dd

[AM|PM]

Specifies a date and a time in the future to be the first instance when the scheduled task will run,

and to be the starting point for any specified recurrence.

•

[

every

Specifies the interval at which the task will run.

For better performance when scheduling a

TakeSnapshot

task that will run under heavy I/O

conditions or on more than three volumes, the retention count and the schedule interval should

be set to similar values; for example if the retention count is 10 then the interval should be set to

10 minutes.

For a

ReplicateVolume

task, the default and minimum interval is 30 minutes.

•

[between

[AM|PM] and

[AM|PM]]

Constrains the time range during which the task is permitted to run. Ensure that the start time is

within the specified time range.

•

st|

nd|

rd|

Constrains the days or months when the task is permitted to run. Ensure that this constraint

includes the start date.

•

[count

]

Constrains the number of times the task is permitted to run.

•

[expires

yyyy-mm-dd

[AM|PM]]

Specifies when the schedule expires, after which the task will no longer run.

task-name

task-name

The task to run. The name is case sensitive.

schedule-name

A name for the new schedule. The name is case sensitive; cannot include a comma, double quote,

left angle bracket, or backslash; and can have a maximum of 32 bytes. A name that includes a

space must be enclosed in double quotes.

Example

Create schedule

Sched1

that runs

Task1

for the first time on March 1, 2012; runs daily between

midnight and 1:00 AM; and runs for the last time in the morning of January 1, 2013:

# create schedule schedule-specification "start 2012-03-01 00:01, every 1 days,
between 12:00 AM and 1:00 AM, expires 2013-01-01 1:00 AM" task-name Task1 Sched1

Success: Command completed successfully. (Sched1) - The schedule was created.
(2012-01-20 15:48:01)

Содержание P2000 G3





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды

HP P2000 G3, Справочное руководство CLI

Результаты поиска

Содержание P2000 G3

Отзывы:

Похожие инструкции для P2000 G3

Бренды по названию

Популярные бренды