HP HP 8360 L Series, Руководство пользователя

Страница: 146 / 429

The International
IEEE Standard 488.1-1987, IEEE Standard Digital Interface
for
Institute of Electrical
Programmable Instrumentation. New
York, NY, 1987.
and Electronics
Engineers.
This standard defines the technical details required to design and
build an HP-IB interface (IEEE 488.1). This standard contains
electrical specifications and information on protocol that is beyond
the needs of most programmers. However, it can be useful to clarify
formal definitions of certain terms used in related documents.
IEEE Standard IEEE Standard Codes, Formats,
Protocols, and Common Commands For Use with ANSI/IEEE Std
New York, NY, 1987.
This document describes the underlying message formats and data
types used in SCPI. It is intended more for instrument firmware
engineers than for instrument user/programmers. However, you may
find it useful if you need to know the precise definition of certain
message formats, data types, or common commands.
To obtain a copy of either of these documents, write to:
The Institute of Electrical and Electronics Engineers, Inc.
345 East 47th Street
New York, NY 10017
USA
Hewlett-Packard
BASIC Interfacing Techniques. Vol. 2, Specific Interfaces,
Company
1987.
This HP BASIC manual contains a good non-technical description
of the HP-IB (IEEE 488.1) interface in chapter 12, “The HP-IB
Interface”. Subsequent revisions of HP BASIC may use a slightly
different title for this manual or chapter. This manual is the best
reference on instrument I/O for HP BASIC programmers.
Hewlett-Packard Company.
Tutorial Description
of
the
Hewlett-Packard Interface Bus, 1987.
This book provides a thorough overview of HP-IB basics for the
HP-IB system designer, programmer, or user.
To obtain a copy of either of these documents, contact the
Hewlett-Packard representative listed in your telephone directory.
l-120 Getting Started Programming