HP HP 8360 L Series, Руководство пользователя

Страница: 291 / 429

COMMAND SUMMARY
AUTO
How the list is played back.
Each new frequency point is
stepped to automatically,
after waiting the specified
time.
AUTO BUS Wait for a <GET> or *TRG
over the HP-IB before
advancing to the next
frequency in the list.
AUTO Wait for a signal to be
received on the external
input before advancing to
the next frequency in the
list.
Don’t care
Only the list point
specified by
is played back.
*RST state is AUTO.
l
l
LIST : : ion?
Sets and queries the list of correction levels that correspond to each
of the frequencies entered using the
command. The
attenuator is not allowed to change during the list execution. The
number of parameters can be from 1 to 801.
After
the value is 0.
l
LIST : : :
Returns the number of correction points that have been entered into
the list array. After *RST returns a 1.
l
LIST:TRIGger:SOURce
l
LIST:TRIGger:SOURce?
Sets and queries the list point-to-point trigger source when in the
automatic list mode. See LIST and CONT for more details.
*RST state is
l
l
MARKer : AMPLitude ?
Sets and queries the amplitude marker on/off switch. While [n] may
be used, there is really only a single switch for all the markers.
*RST value is OFF.
l
MARKer : AMPLitude : I
l
MARKer : AMPLitude :
Sets and queries the value of the amplitude marker. While [n] may
S-34 Operating and Programming Reference