Honeywell SYA14 Series, Руководство пользователя

Страница: 466 / 737

40FY Series
ISSUE 2
PK 80370
For application help: call 1-800-537-6945 Honeywell
•
MICRO SWITCH Sensing and Control 3
Step 3 - Test the 40FY sensor as
follows:
•
Actuate the door interrupt sensor
and ensure the target indicator
LED indicates as follows:
Magnetic
Actuator
Present Magnetic
Actuator
Absent
Normally
Closed LED OFF LED ON
Normally
Open LED ON LED OFF
•
If the door interrupt sensor fails to
operate correctly, ensure wiring
and alignment are correct.
•
If the sensor still does not work,
return the product to Honeywell.
SPECIFICATIONS
Sensor Type 3-wire DC 2-wire AC
Sensing Distance 41FY1 41FY2 41FY1 41FY2
Min. Operate 6,35 mm
(.25 in.) 7,6 mm
(.30 in.) 7,6 mm
(.30 in.) 10,2 mm
(.40 in.)
Max. Release 15,24 mm
(.60 in.) 19,05
mm
(.75 in.) 19,05 mm
(.75 in.) 25,4 mm
(1.0 in.)
Supply Voltage 10 to 30 VDC 93 to 132 VAC
Load Current 0 to 200 mA 0 to 500 mA
Leakage Current 30 mA 1.5 mA max.
Voltage Drop, max. PNP: 2.5 V
NPN: 1.5 V 6 V @ 500 mA
Current
Consumption,
max. 40 mA

Inrush Current,
max.

1.2 A/20 msec
Repeatability*
±
3%
±
3%
Operating
Temperature -30 to +85
°
C
(-22 to +185
°
F)
-25 to +70
°
C
(-13 to +158
°
F)
Protection Class IP 67 (Dust tight, temporary immersion)
NEMA** 4, 6, 6P, 13
Materials Housing: Polycarbonate. Cable: 22 gage PVC
Circuit Protection Transients (power and output), incorrect wiring
* Repeatability is the ability of the sensor to trigger at the same point, plus
or minus a given tolerance, after every operation (at constant voltage and
temperature) over the entire range of the sensor’s specifications.
** Application Note: Enclosures are based, in general, on the broad
definitions outlined in NEMA standards. Therefore, it will be necessary for
the user to determine that a particular enclosure is adequate when exposed
to the specific conditions that might exist in intended applications. Except
as might otherwise be noted, all references to products relative to NEMA
enclosure types are based on MICRO SWITCH evaluation only.
ELECTROMAGNETIC COMPATIBILITY
Characteristics Standard Level
Impulse Voltage Withstand IEC255-5 1 KV
Radiated Electromagnetic Field
Immunity IEC801-3 3 V/m
Electrostatic Discharge (ESD)
Immunity IEC1000-4-2 8 KV
Fast Transient Immunity IEC1000-4-4 1 KV
Radiated Emissions CISPR 11 within
specified
limits
Conducted Emissions as Required CISPR 11 within
specified
limits