Hivertec motionCAT HCPCI-MNT720M, Руководство пользователя

Страница: 112 / 168

101
φ3.5
(2) Mounting and demounting a slave on/off the DIN rail
Mounting Appearance of the mounted slave Demounting (Using a
flathead screwdriver)
Figure 4.1-4 Mounting and demounting a slave on/off the DIN rail
4.1.3 Installing on the Floor with Screws
(1) How to install on the floor
As shown in the figure below, each frame features a hook slot and a screw hole. Fix the slave to the floor at
three points: the hook slot of the rightmost frame, and the hook slot and screw hole of the leftmost frame when
looked from above.
<How to install on the floor> <Base frame>
Figure 4.1-5 How to install on the floor
Downward Fulcrum
Push upward
With the slave hooked at
the edge of the rail, push
the unit toward the wall.
The mount surface fits
along the wall surface.
Hook slot
Large:

8
Small:

3.5
Remove the cover to drive the
screws.
Hook slots and

3.5 circular hole
First, drive M3 screws
through the hook slots.
Then, hook the slave onto
the screw.
Frame
For a M3 screw
Large:

8
Small:

3.5
The leftmost frame is the
base frame.