manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, Руководство пользователя

Пользовательское руководство Hitachi TAGMASTORE MK-90RD011-25 доступно для бесплатного скачивания с нашего вебсайта. Это надежное и удобное устройство для хранения данных. Получите подробную информацию о настройке и использовании этого продукта, скачав его бесплатное руководство с нашего сайта.

Поделиться
Скачать
background image

170 

Chapter 4  Performing CCI Operations 

Parameter Value 

Options 

-h:

 

Displays Help/Usage and version information. 

-q:

 

Terminates the interactive mode and exits the command.  

-z or -zx (OpenVMS cannot use the -zx option):

 

Makes the paircreate command enter interactive mode. 

The -zx option guards performing of the HORCM in interactive mode. When this option detects a HORCM 

shut down, interactive mode terminates. 
-I[H][M][instance#] or -I[TC][SI][instance#] Specifies the command as [HORC]/[HOMRCF], and used  

for specifying Instance# of HORCM  
-g <group>:

 

Specifies a group name defined in the configuration definition file. The command is 

executed for the specified group unless the -d <pair Vol> option is specified.  
-d <pair Vol>:

 

Specifies paired logical volume name defined in the configuration definition file. When this 

option is specified, the command is executed for the specified paired logical volume.  
-d[g] <raw_device> [MU#]:

 

Searches a group on the configuration definition file (local instance) for the 

specified raw_device, and if the specified raw_device is contained in the group, the target volume is 

executed as the paired logical volume (-d) or group (-dg). This option is effective without specification of 

“-g <group>“ option. If the specified the raw_device is contained in two or more groups, the command is 

executed on the first group. 
-d[g] <seq#> <LDEV#> [MU#]:

 

Searches a group on the configuration definition file (local instance) for 

the specified LDEV, and if the specified LDEV is in the group, the target volume is executed as the paired 

logical volume (-d) or group (-dg). This option is effective without specification of “-g <group>“ option. If 

the specified LDEV is contained in two or more groups, the command is executed on the first group. The 

<seq #> <LDEV #> values can be specified in hexadecimal (by addition of “0x “) or decimal notation. 
-f[g] <fence> [CTGID] (Hitachi TrueCopy or UR only):

 

Specifies the fence level for assuring the 

consistency of paired volume data. A fence level of “data”, “status”, “never”, or “async” must be specified. 

Fence level "-f  async" can be specified only for TC Async/UR. The “-fg” option is used to make TC Sync 

CTG volume, and fence level must be specified as "-fg data", "-fg status", or "-fg never". 
A CTGID (CT Group ID) is assigned automatically if you do not specify the “CTGID” option in this 

command (and define it in the config file). If “CTGID” is not specified (with “-f async” or “-fg” option) and 

the maximum number of CT groups already exists (e.g., 256 for USP/NSC, 128 for 9900V), an 

EX_ENOCTG error will be returned. Therefore, the “CTGID” option can forcibly assign a volume group to 

an existing CTGID (0-15/63/127/255) on the Hitachi RAID storage systems. The CTGID option is ignored 

unless you specify the “-f async” or “-fg” option. 
-vl or -vr:

 

Specifies the data flow direction and must always be specified. The -vl option specifies “local” 

and the host which issues the command possesses the primary volume. The -vr option specifies “remote” 

and the remote host possesses the primary volume while the local host possesses the secondary volume.  
-c <size>:

 

Specifies the number of extents (1 - 15) to be used for the initial data copy. If this option is not 

specified a default value is used. 
-nocopy:

 

Creates paired volumes without copying data in the case in which the data consistency of 

simplex volumes is assured by the user.  
-nomsg:

 

Suppresses messages to be displayed when this command is executed. It is used to execute 

this command from a user program. This option must be specified at the beginning of a command 

argument. The command execution log is not affected by this option. 
-split (ShadowImage only):

 

Splits the paired volume after the initial copy operation is complete. This 

option will return after changed the state in PVOL_PSUS & SVOL_COPY immediately, and SVOL state 

will be changed to “SVOL_SSUS” after all data is copied. (See Note 2 under Table 2.3 for details.) 
-m <mode>: 

mode = noread (ShadowImage only):

 

Specifies the noread mode for hiding the secondary volume. The 

secondary volume becomes read-disabled when this mode option is specified. The secondary volume is 

read-enabled when this mode option is omitted. Note: The primary volume becomes read-disabled during 

a reverse resync operation (restore option of pairresync command). 

mode = cyl (9900V only):

 

sets TrueCopy bitmap difference management to cylinder. 

mode = trk (9900V only):

 

sets TrueCopy bitmap difference management to track. 

Note: If the mode (cyl or track) is not specified, the default values are used:

 

default is track for OPEN-3 

and OPEN-9; default is cylinder for OPEN-E and OPEN-L. 

Note: For TrueCopy volumes paired between 9900V and 9900 storage systems, the bitmap tables will be 

managed at the Cylinder level, even if Track is specified. 
mode=grp [CTGID] (9900V ShadowImage only). Makes a group for splitting all ShadowImage pairs 

specified in a group. Like a TrueCopy Async/UR consistency group, ShadowImage guarantees data 

consistency among multiple LUNs in a group at a single point in time when doing a split using the 

“pairsplit -g <group>“ command (except “-S” or “-E” option). 
A CTGID (CT Group ID) is assigned automatically if you do not specify the “CTGID” option in this 

command. If “CTGID” is not specified and the maximum number of CT groups already exists, an 

EX_ENOCTG error will be returned. Therefore, the “CTGID” option can forcibly assign a volume group to 

an existing CTGID (e g  0 127 on 9900V)  

Содержание TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TAGMASTORE MK-90RD011-25

Lowrance EP-85R Installation And Operation Instructions Manual preview
EP-85R
Бренд: Lowrance Страницы: 32
Harmonic MediaStore 7200 Quick Reference Manual preview
MediaStore 7200
Бренд: Harmonic Страницы: 2
garofalo V06.01.002 User Manual preview
V06.01.002
Бренд: garofalo Страницы: 12
Eaton Cutler Hammer SRAM PC104 Instruction Manual preview
Cutler Hammer SRAM PC104
Бренд: Eaton Страницы: 2
Palram Skylight Shed-6x5 Assembly Instructions Manual preview
Skylight Shed-6x5
Бренд: Palram Страницы: 56
Emerson HPR12K-00 Operating Instructions Manual preview
HPR12K-00
Бренд: Emerson Страницы: 6
Emerson U.B. Funkeys FK609 Owner'S Manual preview
U.B. Funkeys FK609
Бренд: Emerson Страницы: 1
Fujitsu PG-HDH61A User Manual preview
PG-HDH61A
Бренд: Fujitsu Страницы: 12
Fujitsu PG-HD6G1C User Manual preview
PG-HD6G1C
Бренд: Fujitsu Страницы: 16
Fujitsu MPG3xxxAT Product Manual preview
MPG3xxxAT
Бренд: Fujitsu Страницы: 201
Fujitsu PG-HD2E4H User Manual preview
PG-HD2E4H
Бренд: Fujitsu Страницы: 14
Fujitsu MPC3045AH Product Manual preview
MPC3045AH
Бренд: Fujitsu Страницы: 185
Fujitsu MPC3032AT Product Manual preview
MPC3032AT
Бренд: Fujitsu Страницы: 179
Fujitsu MPA3017AT Product Manual preview
MPA3017AT
Бренд: Fujitsu Страницы: 176
Fujitsu MPD3091AH Product Manual preview
MPD3091AH
Бренд: Fujitsu Страницы: 191
Fujitsu MJA2080BH Product/Maintenance Manual preview
MJA2080BH
Бренд: Fujitsu Страницы: 320
Fujitsu MPD3043AT Product Manual preview
MPD3043AT
Бренд: Fujitsu Страницы: 191
Fujitsu MPB3021AT Product Manual preview
MPB3021AT
Бренд: Fujitsu Страницы: 180

Бренды по названию

Популярные бренды

Загрузить еще бренды