Hitachi TAGMASTORE MK-90RD011-25 Скачать руководство пользователя страница 238

Страница: 238 / 388

220

Chapter 4 Performing CCI Operations

Parameter Value

Options

-h:

Displays Help/Usage and version information.

-q:

Terminates the interactive mode and exits the command.

-z or -zx (OpenVMS cannot use the -zx option):

Makes the horctakeover command enter the interactive

mode. The -zx option guards performing of the HORCM in the interactive mode. When this option detects

a HORCM shutdown, interactive mode terminates.
-I[H][M][instance#] or -I[TC][SI][instance#] Specifies the command as [HORC]/[HOMRCF], and used

for specifying instance# of HORCM
-g <group>:

Specifies a group name defined in the configuration definition file. The command is

executed for the specified group unless the -d <pair Vol> option is specified.
-d <pair Vol>:

Specifies paired logical volume name defined in the configuration definition file. When this

option is specified, the command is executed for the specified paired logical volume.
-d[g] <raw_device> [MU#]:

Searches a group on the configuration definition file (local instance) for the

specified raw_device, and if the specified raw_device is contained in the group, the target volume is

executed as the paired logical volume (-d) or group (-dg). This option is effective without specification of

“-g <group>“ option. If the specified the raw_device is contained in two or more groups, the command is

executed on the first group.
-d[g] <seq#> <LDEV#> [MU#]:

Searches a group on the configuration definition file (local instance) for

the specified LDEV, and if the specified LDEV is contained in the group, the target volume is executed as

the paired logical volume (-d) or group (-dg). This option is effective without specification of “-g <group>“

option. If the specified LDEV is contained in two or more groups, the command is executed on the first

group. The <seq #> <LDEV #> values can be specified in hex (by addition of “0x”) or decimal notation.
-S:

Selects and executes SVOL-takeover. The target volume of the local host must be an S-VOL. If this

option is specified, then the following “-l” option is invalid.
-l:

Enables read and write to the primary volume(s) by a local host only without a remote host, and

executes PVOL-takeover when the primary volume cannot be used because it is fenced (fence = DATA or

STATUS, state = PSUE or PDUB, or PSUE or PDUB volume is contained in the group). If the primary

volume can be accessed, nop-takeover is executed. The target volume of the local host must be a P-VOL.
-t <timeout>:

Must be specified for async volumes only, ignored for sync. Specifies the maximum time to

wait (in seconds) for swap-takeover and SVOL-takeover operation to synchronize the P-VOL and S-VOL.

If this timeout occurs, the horctakeover command fails with EX_EWSTOT. To avoid timeout, set this value

less than or equal to the start-up timeout value of the HA Control Script.
-nomsg:

Suppresses messages to be displayed when this command is executed. This option must be

specified at beginning of a command argument. The command execution log is not affected by this option.

Returned values

Normal termination:

Nop-takeover (no operation).

Swap-takeover was successfully executed.

SVOL-takeover was successfully executed.

PVOL-SMPL-takeover was successfully executed.

PVOL-PSUE-takeover was successfully executed. (This value depends on the microcode level.)

5: SVOL-SSUS-takeover was successfully executed. (This value depends on the microcode level.)

Abnormal termination:

other than 0-5, refer to the execution logs for error details.

Table 4.22 Specific Error Codes for Horctakeover

Category

Error Code

Error Message

Recommended Action

Value

Volume status

EX_ENQVOL

Unmatched volume status within

the group

Confirm status using pairdisplay command.

Make sure all volumes in the group have

the same fence level and volume attributes.

236

EX_INCSTG

Inconsistent status in group

Confirm pair status using pairdisplay.

229

Содержание TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Результаты поиска

Содержание TAGMASTORE MK-90RD011-25

Отзывы:

Похожие инструкции для TAGMASTORE MK-90RD011-25

Бренды по названию

Популярные бренды

Hitachi TAGMASTORE MK-90RD011-25, Руководство пользователя

Результаты поиска

Содержание TAGMASTORE MK-90RD011-25

Отзывы:

Похожие инструкции для TAGMASTORE MK-90RD011-25

Бренды по названию

Популярные бренды