manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, Руководство пользователя

Пользовательское руководство Hitachi TAGMASTORE MK-90RD011-25 доступно для бесплатного скачивания с нашего вебсайта. Это надежное и удобное устройство для хранения данных. Получите подробную информацию о настройке и использовании этого продукта, скачав его бесплатное руководство с нашего сайта.

Поделиться
Скачать
background image

 

Hitachi Command Control Interface (CCI) User and Reference Guide 

225 

4.10.1.3

 

SVOL-Takeover Function 

The SVOL-takeover function allows the takeover node to use the secondary volume (except 
in COPY state) in SSUS(PSUS) state (i.e., reading and writing are enabled), on the assumption 
that the remote node (possessing the primary volume) cannot be used. The data consistency 
of the Hitachi TrueCopy SVOL is evaluated by its pair status and fence level (same as 
paircurchk, refer to). If the primary and secondary volumes are not consistent, the SVOL-
takeover function fails. If primary and secondary volumes are consistent, the SVOL-takeover 
function attempts to switch to the primary volume using 

Resync for Swapping

. If successful, 

the SVOL-takeover function returns 

Swap-takeover

 as the return value of the horctakeover 

command. If not successful, the SVOL-takeover function returns 

SVOL-SSUS-takeover

 as the 

return value of the horctakeover command. In case of a host failure, 

Swap-takeover

 is 

returned. In case of an ESCON/FC or P-VOL site failure, 

SVOL-SSUS-takeover

 is returned. 

SVOL-takeover can be specified for a paired volume or a group. If the SVOL-takeover is 
specified for a group, a data consistency check is executed for all volumes in the group, and 
all inconsistent volumes are displayed (see example in Figure 4.24). 

Group  Pair vol        Port  targ# lun#  LDEV#  Volstatus Status Fence   To be... 
oradb1 /dev/dsk/hd001  CL1-A  1     5    145     S-VOL    PAIR   NEVER   Analyzed 
oradb1 /dev/dsk/hd002  CL1-A  1     6    146     S-VOL    PSUS   STATUS  Suspected 

Figure 4.24  Display of Inconsistent Volumes for SVOL-Takeover of Group 

Note for Hitachi TrueCopy Async/UR:

 The CCI software on the S-VOL side will issue a 

Suspend for Swapping

 to the S-VOL side RAID storage system. Non-transmitted data of the 

P-VOL will be copied to the S-VOL side, and a 

Resync for Swapping

 operation will be 

performed (after the copy process). In case of a host failure, this data synchronize operation 
will be accomplished and SVOL-takeover function will return 

Swap-takeover 

by attempting a 

Resync for Swapping

. In case of an ESCON/FC or P-VOL site failure, this data synchronize 

operation may fail. Even so, the SVOL-takeover function will do 

Suspend for Swapping

, and 

enable the S-VOL to be used. As result, this function will be returned as 

SVOL-SSUS-

takeover

. Through this behavior, you will be able to judge that the non-transmitted data of 

the P-VOL was not transmitted completely when SVOL-takeover returns 

SVOL-SSUS-

takeover

. 

The SVOL-takeover operation is required to copy non-transmitted P-VOL data within a given 
timeout value (specified by the 

-t <timeout>

 option). If the timeout occurs (before SVOL 

takeover has completed all S-VOL changes to SSWS state), the horctakeover command will 
be failed with EX_EWSTOT. Therefore this timeout value should be a greater than (or equal 
to) the start-up timeout value for the HA Control Script. 

If the horctakeover command failed due to timeout, then try to recover as follows: 

1.

 

Wait until SVOL state becomes SSWS (use 

pairdisplay -g  <group> -l  -fc

 command), and 

try to the start-up again for the HA Control Script. 

2.

 

Make an attempt at doing resynchronize original PVOL based on SVOL using 

pairresync  

-g  <group> -swaps -c <size>

  for Fast Failback Performance. If this operation has been 

failed at [EX_CMDRJE] or [EX_CMDIOE], then the cause is ESCON/FC link down and/or 
site failure. After the recovery from failure, please try again this command. 

Содержание TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TAGMASTORE MK-90RD011-25

Arrow Storage Products SCG67BG Owner'S Manual & Assembly Manual preview
SCG67BG
Бренд: Arrow Storage Products Страницы: 36
YardCraft Fairmont Garden Shed Assembly Instructions Manual preview
Fairmont Garden Shed
Бренд: YardCraft Страницы: 29
Denios HazMat station EPO-2 Operation Manual And Spare Parts List preview
HazMat station EPO-2
Бренд: Denios Страницы: 6
Yotta SolarLEAF SL-1000 User Manual preview
SolarLEAF SL-1000
Бренд: Yotta Страницы: 13
U-Line H-3619 Assembly Instructions Manual preview
H-3619
Бренд: U-Line Страницы: 15
STONEFLY USO-HA D500 Series Setup Manual preview
USO-HA D500 Series
Бренд: STONEFLY Страницы: 58
Segger embOS-MPU Manual preview
embOS-MPU
Бренд: Segger Страницы: 56
IOGear GMD2025U Quick User Manual preview
GMD2025U
Бренд: IOGear Страницы: 2
Hitachi HUS151414VL3600 Quick Installation Manual preview
HUS151414VL3600
Бренд: Hitachi Страницы: 5
Hitachi HUS157336EL3600 Quick Installation Manual preview
HUS157336EL3600
Бренд: Hitachi Страницы: 4
Hitachi Hyper Scale-Out Maintaining And Troubleshooting preview
Hyper Scale-Out
Бренд: Hitachi Страницы: 42
Hitachi Microdrive 3K8 Quick Installation Manual preview
Microdrive 3K8
Бренд: Hitachi Страницы: 4
Hitachi HTS548020M9AT00 Quick Installation Manual preview
HTS548020M9AT00
Бренд: Hitachi Страницы: 2
Hitachi IC25N020ATMR04 Quick Installation Manual preview
IC25N020ATMR04
Бренд: Hitachi Страницы: 2
Hitachi HUSSL4040BSS600 Quick Installation Manual preview
HUSSL4040BSS600
Бренд: Hitachi Страницы: 2
Hitachi LifeStudio Desk Quick Start Manual preview
LifeStudio Desk
Бренд: Hitachi Страницы: 2
Hitachi HUS156060VLS600 Quick Installation Manual preview
HUS156060VLS600
Бренд: Hitachi Страницы: 2
Hitachi HUS157336EL3600 Oem Manual preview
HUS157336EL3600
Бренд: Hitachi Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды