manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, Руководство пользователя

Пользовательское руководство Hitachi TAGMASTORE MK-90RD011-25 доступно для бесплатного скачивания с нашего вебсайта. Это надежное и удобное устройство для хранения данных. Получите подробную информацию о настройке и использовании этого продукта, скачав его бесплатное руководство с нашего сайта.

Поделиться
Скачать
background image

180 

Chapter 4  Performing CCI Operations 

4.4

 

Resynchronizing Pairs (Pairresync) 

The pairresync command re-establishes a split pair and then restarts the update copy 
operations to the secondary volume (see Figure 4.5). The pairresync command can 
resynchronize either a paired logical volume or a group of paired volumes. The normal 
direction of resynchronization is from the primary volume to the secondary volume. If the 

-

-restore 

option is specified (ShadowImage only), the pair is resynchronized in the reverse 

direction (i.e., secondary volume to primary volume). Figure 4.6 shows the normal and 
restore resync operations. The primary volume remains accessible during pairresync, except 
when the 

-restore 

option is specified. The secondary volume becomes write-disabled when 

the pairresync command is issued. Table 4.7 lists and describes the pairresync command 
parameters and returned values. The primary volume’s server is automatically detected by 
the pairresync command, so the server does not need to be specified in the pairresync 
command parameters. Table 4.8 lists the error codes for 

pairresync

. 

Pairresync

 terminates before resynchronization of the secondary (or primary) volume is 

complete. Use the pair event waiting or pair display command to verify that the resync 
operation completed successfully (status changes from COPY to PAIR). The execution log file 
also shows completion of the resync operation. The status transition of the paired volume is 
judged by the status of the primary volume. The fence level is not changed (only for 
TrueCopy, TrueCopy Async, or UR). 

If no data was written to the secondary volume while the pair was split, the differential data 
on the primary volume is copied. If data was written to the secondary volume, the 
differential data on the primary volume and secondary volume is copied. This process is 
reversed when the ShadowImage 

-restore 

option is specified. 

Before issuing the pairresync command (normal or reverse direction), make sure that the 
secondary volume is not mounted on any UNIX system. Before issuing a reverse pairresync 
command, make sure that the primary volume is not mounted on any UNIX system. 

Note on Quick Resync/Restore: 

If the “$HORCC_RSYN=QUICK” /”$HORCC_REST=QUICK” 

environment variable is set (USP V/VM or USP/NSC), the “pairresync” operation will be 
performed as 

Quick Resync

 regardless of the system option mode 87/80 setting via SVP. The 

$HORCC_RSYN and $HORCC_REST environment variables are ignored by 9900V/9900. 

Hitachi TrueCopy only:

 The 

swaps(p)

 option is used to swap volume from the SVOL(PVOL) 

to PVOL(SVOL) at suspending state on the SVOL(PVOL) side, and resynchronize the 
NEW_SVOL based on the NEW_PVOL. At the result of this operation, the volume attributes of 
own host (local host) become the attributes for the NEW_PVOL(SVOL). The paircreate 
command cannot execute copy rejection in case of an error condition which made the target 
volume is accompanied by maintenance work. The 

swaps(p)

 option will: 

„

 

Ignore the 

-l

 option. 

„

 

Use a default of 

three

 for number of copy tracks (-c size) when 

-c size

 option is 

omitted. 

„

 

Execute at PAIR state as well as PSUS/PSUE state (not applicable to COPY and SMPL). 

„

 

Since the target volume of the local host has been already the PVOL(SVOL), this target 
volume is skipped an operation. 

Содержание TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TAGMASTORE MK-90RD011-25

Seagate ST31230N/ND Installation Manual preview
ST31230N/ND
Бренд: Seagate Страницы: 36
IBM Deskstar 16GP Installation Manual preview
Deskstar 16GP
Бренд: IBM Страницы: 2
Rasilient ApplianceStor 15MT User Manual preview
ApplianceStor 15MT
Бренд: Rasilient Страницы: 30
Macally Mobile Wi-Fi Pocket Drive User Manual preview
Mobile Wi-Fi Pocket Drive
Бренд: Macally Страницы: 71
Keter DUOTECH HIGH-STORE+ 1403609 User Manual preview
DUOTECH HIGH-STORE+ 1403609
Бренд: Keter Страницы: 36
QNAP TS-410E-8G User Manual preview
TS-410E-8G
Бренд: QNAP Страницы: 49
extraspace expandacom Assembly Instructions Manual preview
expandacom
Бренд: extraspace Страницы: 16
Seagate EXOS ENTERPRISE ST10000NM001G Product Manual preview
EXOS ENTERPRISE ST10000NM001G
Бренд: Seagate Страницы: 56
SanDisk 2GB - 2GB Micro Secure Digital Card Product Manual preview
2GB - 2GB Micro Secure Digital Card
Бренд: SanDisk Страницы: 26
Profiwerk Freiburg 42978909 Assembly Instructions Manual preview
Freiburg 42978909
Бренд: Profiwerk Страницы: 10
Brookstone 437590 User Giude preview
437590
Бренд: Brookstone Страницы: 8
Fujitsu MAY2036RC Product/ Product/Maintenance Manual preview
MAY2036RC Product/
Бренд: Fujitsu Страницы: 94
Fujitsu MAX3036NC Maintenance Manual preview
MAX3036NC
Бренд: Fujitsu Страницы: 130
Fujitsu MBA3073FD Product Manual preview
MBA3073FD
Бренд: Fujitsu Страницы: 106
Fujitsu MBC2036RC SERIES Installation Manual preview
MBC2036RC SERIES
Бренд: Fujitsu Страницы: 1
Fujitsu MBB2073RC SERIES Product Manual preview
MBB2073RC SERIES
Бренд: Fujitsu Страницы: 98
Fujitsu MAX3036RC SERIES Product/Maintenance Manual preview
MAX3036RC SERIES
Бренд: Fujitsu Страницы: 94
Fujitsu MAX3036FC Product/Maintenance Manual preview
MAX3036FC
Бренд: Fujitsu Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды