manualshive.com logo in svg

Hitachi TAGMASTORE MK-90RD011-25, Руководство пользователя, Страница: 274 / 388

Поделиться
Скачать
Hitachi TAGMASTORE MK-90RD011-25 Скачать руководство пользователя страница 274

256 

Chapter 4  Performing CCI Operations 

Output of the 

raidqvchkscan

 command with 

-v jnl 0

 option: 

„

 

JID: 

Displays the journal group ID.

 

„

 

MU: 

Displays the mirror descriptions on UR.

 

„

 

CTG: 

Displays the CT group ID.

 

„

 

JNLS: 

Displays the following status in the journal group.

 

–

 

SMPL: this means the journal volume which does not have a pair, or deleting. 

–

 

P(S)JNN: this means “P(S)vol Journal Normal Normal”. 

–

 

P(S)JNS this means “P(S)vol Journal Normal suspend” created with 

-nocsus

 option. 

–

 

P(S)JSN: this means “P(S)vol Journal Suspend Normal”.

 

–

 

PJNF: this means “P(S)vol Journal Normal Full”.

 

–

 

P(S)JSF: this means “P(S)vol Journal Suspend Full”.

 

–

 

P(S)JSE: this means “P(S)vol Journal Suspend Error” including link failure. 

–

 

P(S)JES this means “P(S)vol Journal Error suspend” created with 

-nocsus

 option. 

„

 

AP: 

Displays the following two conditions (status) according to the pair status.

 

–

 

Shows the number of active paths on the initiator port in UR links. ‘Unknown’ is 
shown as ‘-’. 

 

 
 
 
 
 

                             

 

 
 
 
 
 

                             

P-JNL 

AP 

S-JNL 

AP 

Control

Read Data

/control

AM 

 

–

 

AM: The activity monitor that detects whether or not there is a request for data 
from the initiator at regular intervals. If AM detects a time-out, the P-JNL state will 
be changed from P-JNN to PJSE. 

Note: 

The same path information is used for AP for three commands (pairvolchk, 

pairdisplay, raidvchkscan). The differential is that pairvolchk and pairdisplay are to 
show a special meaning with SSUS(SSWS) state. 

„

 

Q-Marker

: Displays the sequence # of the journal group ID, called the Q-marker. For 

P-JNL, Q-Marker shows the latest sequence # on the P-JNL volume. For S-JNL, the 
Q-Marker shows the latest sequence # of the cache(DFW). 

Содержание TAGMASTORE MK-90RD011-25





































































































































































































































































































































































































Отзывы:

Нет отзывов