Hill-Rom 305 Manual Bed Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 176

Hill-Rom 305 Manual Bed Скачать руководство пользователя страница 3

Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,

Page i

Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)

© 2008 by Hill-Rom Services, Inc. ALL RIGHTS RESERVED.

Manufactured for Hill-Rom by: Optima Healthcare Inc.

Distributed by:

HILL-ROM COMPANY, INC.

1069 STATE ROUTE 46 E

BATESVILLE, IN 47006-9167

No part of this text shall be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or by any
information or retrieval system without written permission from Hill-Rom
Services, Inc. (Hill-Rom).

The information in this manual is confidential and may not be disclosed to
third parties without the prior written consent of Hill-Rom.

Second Edition

First Printing 2004

Printed in the USA

Basic Care™ is a trademark of Hill-Rom Services, Inc.

CSA® is a registered trademark of Canadian Standards Association.

Hill-Rom® is a registered trademark of Hill-Rom Services, Inc.

Oilite® is a registered trademark of Beemer Precision, Incorporated.

Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.

The information contained in this manual is subject to change without notice.
Hill-Rom makes no commitment to update or keep current, the information
contained in this manual.

Hill-Rom reserves the right to make changes without notice in design,
specifications, and models. The only warranty Hill-Rom makes is the express
written warranty extended on the sale or rental of its products.

To order additional copies of this manual (MAN336), refer to the back cover
for contact information. For countries not listed on the back cover, contact
your distributor.

«
1
2
3
4
5
...
»

Содержание 305 Manual Bed

















































































































































































Отзывы:

Нет отзывов