Hill-Rom 305 Manual Bed страница 26 Скачать руководство пользователя

Страница: 26 / 176

Final Actions
Chapter 2: Troubleshooting Procedures

Page 2 - 4

Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,

Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)

13. If the bed has central brake and steer, put the pedal into the steer position.

The steer caster locks, and all of the other casters swivel freely.

Yes

↓

→

Replace the brake and steer caster (refer to procedure 4.25 on
page 4-54).

14. If the bed has central brake and steer, put the pedal into the brake position.

Try to move the bed out of its position. The bed does not move.

Yes

↓

→

Replace the brake caster (refer to procedure 4.25 on page 4-54).

15. If the bed has individual brake and steer casters, press the brakes on each

caster that has that function. Try to move the bed out of its position. The
bed does not move.

Yes

↓

→

Replace the casters that do not operate correctly (refer to
procedure 4.27 on page 4-61).

16. If the bed has individual brake and steer casters, press the steer on the

caster that has function. The steer caster locks and all other casters swivel
freely.

Yes

↓

→

Replace the steer caster (refer to procedure 4.27 on page 4-61).

17. Call Hill-Rom Technical Support at 800-445-3720 (USA).

Final Actions

1. Do the necessary preventive maintenance procedures. See “Preventive

Maintenance Checklist” on page 6-8.

2. Do all of the necessary administration tasks.

Содержание 305 Manual Bed

















































































































































































Результаты поиска

Содержание 305 Manual Bed

Отзывы:

Похожие инструкции для 305 Manual Bed

Бренды по названию

Популярные бренды

Hill-Rom 305 Manual Bed, Руководство по обслуживанию

Результаты поиска

Содержание 305 Manual Bed

Отзывы:

Похожие инструкции для 305 Manual Bed

Бренды по названию

Популярные бренды