Hill-Rom 305 Manual Bed Скачать руководство пользователя страница 108

Страница: 108 / 176

4.25 Central Brake and Steer—Caster Assemblies
Chapter 4: Removal, Replacement, and Adjustment Procedures

Page 4 - 56

Hill-Rom® Basic Care™ Bed, Hill-Rom® 305 Manual Bed,

Hill-Rom® 405 Electric Bed Service Manual (MAN336 REV 2)

2. Put the central brake and steer pedal in the neutral position.

3. Use a jack to lift the head end of the bed off of the floor.

4. Remove the bolt (S) and washer (T) that attach the brake caster (U) to the

bed frame (D) (see figure 4-26 on page 4-56).

Figure 4-26. Central Brake and Steer—Brake Caster Assemblies

5. Remove the bolt (V) and washer (W) that attach the hex rod (X) to the

bracket (Y).

6. Loosen the setscrew (Z) on the rocker arm (AA).

NOTE:

It is not necessary to remove the setscrews.

7. Remove the hex rod (X) from the rocker arm (AA).

8. If necessary, remove the bolt (AB) and nut (AC) that attach the linkage

(AD) to the rocker arm (AA).

Содержание 305 Manual Bed

















































































































































































Результаты поиска

Содержание 305 Manual Bed

Отзывы:

Hill-Rom 305 Manual Bed, Руководство по обслуживанию, Страница: 108 / 176

Результаты поиска

Содержание 305 Manual Bed

Отзывы: