Actilino
Start Up
Page 16
3
Start Up
3.1 Version Information
As of this Section, all common characteristics of the Actilino will be described. This
information applies to firmware Version 1.6 of your Actilino.
3.2 Turning the Power On
Press the on/off button to turn the Actilino on. You can now work independent of a power
source, because the battery is fully charged. You will hear a sound signal and the following
start up message will be displayed on the Braille display:
'actilinoxbHH:MM?'
•
The start message of the Actilino provides an overview of some information
concerning the device and shows the time. It is constructed according to this
scheme: The model name of the device "actilino" (cells 1-8).
•
Charging indicator (cell 9): The battery charge status is displayed in the form of a
bar whose height corresponds to one of the five charging states. If no point is set,
this corresponds to the "empty" charge state. When the battery charge level is full,
all eight points are set. When loading, the charge indicator grows in steps from
below to the current charge state. When charging, the charging indicator moves
faster. After switching on the device, it takes about 10 seconds for this information
to be available.
•
Bluetooth status (cell 10): This cell indicates whether Bluetooth is switched on and,
if so, whether Bluetooth connections exist. If Bluetooth is off, this cell is empty. A
small b indicates that Bluetooth is on. If a large B is shown, there is currently a
Bluetooth connection. If point 8 is set, two Bluetooth connections exist. If dot 6 is set
additionally, there will be three Bluetooth connections.
•
Time (cells 11-15): The clock of the Actilino is displayed in 24-hour format and
without seconds. The colon between hours and minutes flashes every second.
•
Call up the support information (cell 16): After pressing the cursor routing key above
the Braille cell 16, a compact information is displayed which can be important for
support purposes. To return to the start message, press TLM or ESC and TRM or
Enter.
The abbreviations in the support information have the following meaning:
•
FW (
“firmware“): version of the installed firmware
•
SN (
“serial number“):the Actilino’s serial number
•
NSRV (
“next service“): month and year of the next due maintenance
•
LSRV (
“last service“): month and year of last maintenance
•
T (
“tasks“): Performed during the last maintenance
o
CPS (
“caps“): caps exchanged