Hagie 204SP, Руководство оператора, Страница: 88 / 127

SECTION 8 –
MAINTENANCE AND STORAGE
8-11
deposits daily. Replace the filter every 500
hours of operation or yearly, whichever
occurs first.
Secondary Fuel Filter
The Secondary Fuel Filter (located on the
left-hand side of engine - open hood panel to
access) should be replaced every 500 hours
of operation or yearly, whichever occurs first.
Hydraulic Filters
Charge Pressure Filter
• Remove the Charge Pressure Filter
(located on the rear left-hand side of
machine - open hood panel to access)
and replace with a new 4 micron-rated
Charge Pressure Filter every 500 hours
of operation or yearly, whichever occurs
first.
Return Filter
• Remove the Return Filter (located inside
the return filter housing on top of the
hydraulic oil reservoir - remove cover to
access) and replace with a new 25
micron-rated Return Filter every 500
hours of operation or yearly, whichever
occurs first.
High Pressure In-Line Filter
Lift/Dump Valves
Lift Control System Valves are protected
by a 90 Micron In-Line Sintered Bronze Filter
(located beneath machine - lower front
screen panel to access).
NOTE: Replace High Pressure In-Line Filter
if required. Contact your John Deere
dealer for assistance.
Filter Access
1. Remove the two (2) Securement Pins
(located on the front screen panel) and
set aside.
NOTICE
Use of incorrect filter micron rating may
result in system damage and will void the
warranty.
Primary and Secondary Fuel Filters
(Located on the left-hand side of
engine - open hood panel to access)
-Typical View
• Primary
Fuel Filter
• Secondary
Fuel Filter
Charge Pressure and Return Filters
(Located near the rear
left-hand side of machine)
-Typical View
• Return Filter
• Charge
Pressure
Filter