Hagie 204SP, Руководство оператора, Страница: 29 / 127

3-3
SECTION 3 –
CAB
3. Release the lock lever to re-lock the
steering column into position.
Turn Signals
To Activate the Turn Signals
• Move the Turn Signal Switch (located on
the side console) to the LEFT (for a left-
hand turn), or RIGHT (for a right-hand
turn).
NOTE: The Turn Signal Switch will illuminate
when activated in either direction.
NOTE: The Turn Signal Switch is not self-
centering and must be manually
returned to the OFF (mid) position
after turn is complete.
Hazard/Warning Lights
The Hazard/Warning Lights (located on
the front and rear of machine) are to be used
at any time, day or night, when traveling on a
public roadway, unless prohibited by law.
•
Press the Hazard/Warning Lights Switch
(located on the side console) in the UP
position to turn ON.
• Press the Hazard/Warning Lights Switch
in the DOWN position to turn OFF.
Highway Running Lights
The Highway Running Lights (located on
each side of operator’s station) are used
when traveling on a public roadway and are
activated by operating the headlights.
NOTE: The ignition does NOT have to be on
to operate the Highway Running
Lights. However, prolonged use of
these lights without the engine
running is not recommended.
Turn Signal Switch
(Located on the side console)
-Typical View
Hazard/Warning Lights Switch
(Located on the side console)
-Typical View
Highway Running Lights
(Located on each side
of operator’s station)
-Typical View