Hagie 204SP, Руководство оператора, Страница: 102 / 127

9-1
5
- D
A
SH
/ A
UT
O
SECTION 9 – MISCELLANEOUS
TRANSPORTING
When driving on a public roadway or
elsewhere, be aware of any situation where
the machine will be passing under an object
with a clearance lower than the transporting
height of the machine.
Folding the Outriggers
Manual Fold
To unfold (extend) the outriggers:
1. Remove the two Securement Pins
(installed on the Lock Bar Mounting Bolts
- located on the outrigger and center tool
bar) and set aside.
2. Remove Lock Bar and set aside.
3. Unfold outrigger to the fully extended
position.
4. With the outrigger fully extended, install
the provided Ratchet Bar onto the outrig-
ger and center tool bar mounting bolts.
5. Reinstall the Securement Pins (that were
removed in Step 1) to the Ratchet Bar
Mounting Bolts.
WARNING
When transporting the detasseler,
observe the following to avoid serious
injury or death:
• Check for adequate clearance before
driving under any overhead obstructions.
• Contact with power lines may result in
serious injury or death.
WARNING
• Loading the detasseler onto a trailer may
result in machine rollover.
• Stopping the detasssler on trailer ramps
may result in machine rollover.
CAUTION
Ensure the outriggers are in the folded
and locked position before transporting
the machine. Failure to comply may
result in personal injury or equipment
damage.
Securement Pin/Lock Bar Assembly
(Located between the
outrigger and center tool bar)
-Typical View
• Securement Pins
• Lock
Bar
Ratchet Bar Installation
-Typical View