SECTION 2 –
SAFETY AND PRECAUTIONS
2-2
•
Know and obey all state laws for driving
agricultural equipment on a public
roadway.
•
Take caution when entering or exiting a
public roadway.
•
Always drive at a reasonable field speed
to suit the conditions.
•
Reduce machine speed while turning.
•
Come to a complete stop before reversing
direction.
•
Pull over to the side of the road before
stopping.
•
Use flashing hazard/warning lights when
traveling on public roadways, day or night,
unless prohibited by law.
•
Ensure the Slow Moving Vehicle (SMV)
emblem and the Speed Indicator Symbol
(SIS) are in place and visible from the rear
of machine when traveling on public
roadways.
Operate Safely
General Operation Safety
•
Do not adjust the factory engine RPM
settings.
•
Handle starting fluid with care. Keep it
away from open flames. Store with the
cap on and in a cool place.
•
Do not look directly into the light sensing
depth unit light beams, as it emits a low
intensity microwave signal, which may
cause possible eye damage.
•
Keep all shields in place.
•
Keep clear of all moving parts and keep
others away when operating.
•
Do not wear loose fitting clothing that may
be blown or drawn into moving parts.
•
Never allow walking personnel in the
same field as the machine.
Tread Width
•
Select the widest tread setting to fit
between crop rows.
•
Never manually adjust the machine’s
tread width until the wheels have been
properly blocked. Loosen the leg clamp
bolts only enough for the leg to slide on
the frame.
Outriggers
•
Ensure the outriggers are in the LOCKED
position during fold procedure.
•
Ensure the outriggers are in the FOLDED
and LOCKED position when driving or
transporting the machine.
Remove Paint Before Welding or
Heating
•
Avoid toxic fumes and dust. Hazardous
fumes can be generated when paint is
heated by welding, soldering, or using a
torch.
•
Do not use chlorinated solvents in areas
where welding will take place.
SMV
SIS (mph)
SIS (km/h)
Содержание 204SP
Страница 2: ...5 DASH AUTO...
Страница 127: ......