Hagie 204SP, Руководство оператора, Страница: 67 / 127

7-9
SECTION 7 –
DETASSELING SYSTEMS
• Press the On/Off Switch (located on the
Tasseltrol Control Panel) in the UP (On)
position.
• On the LCD display will be four lines.
The top line displays the program level.
The second line will flash “Select Man-
ual” (as a warning that you are about to
enter parameter adjustment mode).
Current parameter settings are displayed
on the bottom line (values for B, R, T, L,
and D are typically set). The machine
type will vary from o, p, or c, depending
on valve system.
NOTE: “L” may vary, depending on the
number of lifts on the machine.
Match the Machine Valve Type
• Press the LIFT 1 UP Switch (located on
the Tasseltrol Control Panel)
two (2)
times to display the machine type
selected.
• The o, p, or c (located to the right of
“NEXT” on the bottom line of the LCD
display) indicates the type of machine.
Press the LIFT 2 UP Switch. The display
will now change to the “Select Machine
Type” screen.
• Select the type of machine that the unit
is installed on.
NOTICE
Machines with Tasseltrol software
version 8.7 and greater are equipped
with an enhancement that allows the
operator to set the lift speeds for auto
mode functions.
Auto/Manual Switch
(Located on the Tasseltrol Control Panel)
NOTICE
Ensure the machine valve type is
selected correctly to match the machine
in which the Tasseltrol control box is
installed on.