Hagie 204SP, Руководство оператора, Страница: 66 / 127

SECTION 7 –
DETASSELING SYSTEMS
7-8
3. Engage the parking brake.
4. Start the engine.
5. Press the Master Detasseler Switch
(located on the side console) in the UP
(On) position.
6. Press the corresponding Detasseling
Head Motor Control Switch(es) (located
on the side console) in the UP (On) posi-
tion.
NOTE: If loss of hydraulic pressure occurs
or the low hydraulic oil warning
indicator (located on the side
console) illuminates, shut down the
system immediately. Failure to
comply may result in system damage
and will void the warranty.
7. Press and hold the Throttle Switch
(located on the side console) in the UP/
“rabbit icon” position to achieve the rec-
ommended RPM to operate the detas-
seling head motors.
NOTE: Detasseling heads will be available
for immediate use by increasing
engine RPM.
TASSELTROL
®
/LS SYSTEM
12
™
Setting Up
Enter Parameter Mode
• Press the Auto/Manual Switch (located
on the Tasseltrol Control Panel) in the
UP (Auto) position.
Photo Light Sensor
-Typical View
• Detasseling Head
Motor Control
Switches
• Master Detasseler
Switch
Master Detasseler and Detasseling
Head Motor Control Switches
(Located on the side console)
-Typical View
NOTICE
Operating the Detasseling System
below the recommended 2500 engine
RPM will not provide the system with
adequate hydraulic oil flow and may
cause degraded or poor performance.
Throttle Switch
(Located on the side console)
-Typical View