SECTION 7 –
DETASSELING SYSTEMS
7-10
NOTE: For machines built prior to 2007 with
the original valve system, press the
LIFT 4 Switch under the “o”. If the
machine is equipped with
proportional valves, press the LIFT 5
Switch under the “p”.
For machines built 2007 or newer
with proportional valves, press the
LIFT 6 Switch under the “c”.
•
The display will now revert back to the
“Select Manual” screen with the machine
type that you have just selected dis-
played on the bottom line.
Match How Many Lifts are on
the Machine
(System must be in parameter mode
before proceeding)
•
Press the LIFT 1 UP Switch
two (2)
times
to display how many lifts are on.
NOTE: “L6” (A) on the display indicates that
all six lifts are ON.
•
To change the number of lifts to match
your machine, press the LIFT 3 UP
Switch. This will display the LIFTS: ON-
OFF screen (B).
•
Press the LIFT UP Switch under the cor-
responding lift that you want to turn on/
off.
NOTE: “of” = OFF.
•
After selecting which lifts are to be on/off,
press the LIFT 1 DOWN Switch
two (2)
times
to exit the screen and save new
parameter setting.
Your machine is equipped with six (6)
hydraulic lift hoses, regardless of the number
of lifts available. For machines with less than
six lifts, unused lift hydraulics will be capped
off. When matching how many lifts are on
your machine, program the correct number of
lifts into the display to ensure maximum
performance.
Establish “D” and “V”
(System must be in parameter mode
before proceeding)
•
Press the LIFT 1 UP Switch
two (2)
times
and the display will show the cur-
rent setting of
Dwell
(A) for “all up” and
Valve Compensation
(B) as either
1=ON, or 0=OFF.
2
3
4
5
of
of
4-Lift Machine
2
3
4
of
of
of
3-Lift Machine
of
3
4
of
of
of
2-Lift Machine
Содержание 204SP
Страница 2: ...5 DASH AUTO...
Страница 127: ......