Hagie 204SP, Руководство оператора, Страница: 19 / 127

2-5
SECTION 2 –
SAFETY AND PRECAUTIONS
Seat Belt Operation
• Grasp the Seat Belt Buckle (located on
the outward side of seat) and extend all
the way across your hips, seated below
your abdomen.
• Insert the buckle tongue into the recepta-
cle assembly (located on the opposite
side of seat) and engage into LOCKED
position.
• To release Seat Belt , press the Release
Button (located on the receptacle end)
and allow belt to retract.
Inspection/Replacement
Inspect seat belt and mounting hardware
yearly. Replace seat belt if anchorage
system, buckle, belt, or retractor shows signs
of damage, including evidence of cuts,
fraying or wear, discoloration, or being
heavily soiled - especially with oil grease or
fuel. Replace only with replacement parts
approved for your machine.
ROTATING BEACON
–If Equipped
The Rotating Beacon (located on the left-
hand side of the operator’s station) is used
for increased visibility to others. The beacon
will illuminate when the Hazard/Warning
Lights Switch is activated.
EMERGENCY STOP
(E-Stop)
The E-Stop Switch (located near the side
console) provides a quick and positive
method for stopping the engine in an
emergency situation.
NOTICE
Do not use the E-Stop Switch for non-
emergency stopping or as a parking
brake.
Rotating Beacon
(Located on the left-hand
side of the operator’s station)
-Typical View