Hagie 204SP, Руководство оператора, Страница: 41 / 127

4-3
SECTION 4 –
ENGINE AND DRIVE SYSTEMS
NOTE: The Engine Monitor is factory pre-
set. No adjustments are required.
The Engine Monitor Display is featured
with five soft keys that allow the operator to
select desired engine/transmission data and
display it in analog gauges or digital values,
as well as display active/current alarm
messages.
NOTE: If parameter is not available from the
engine/transmission, the Engine
Monitor will not be allowed to select
it. If a certain parameter becomes
unavailable while in view, “- - -” will
be displayed.
Quad Analog Gauge Screen (F1)
Press the F1 Button to navigate to the
Quad Analog Gauge screen, which displays
up to four (4) current engine parameters. The
display is featured with configurable data, so
up to 16 gauges may be selected.
Quad Analog Data Selection
To adjust the contents of the quad analog
screen, press any of the first four soft keys to
display the Button Bar, then press F5 to
enable cycling through all of the display
parameters.
Quad Digital Data Screen (F2)
Press the F2 Button to navigate to the
Quad Digital Data screen, which like the
Quad Analog Gauge screen, displays up to
four (4) current engine parameters.
Engine Monitor Display
(Located near the front of operator’s station)
-Typical View
Quad Analog Gauge Screen
-Typical View
Quad Digital Data Screen
-Typical View