Hagie 204SP, Руководство оператора, Страница: 112 / 127

SECTION 9 –
MISCELLANEOUS
9-11
Blade Rotation (Right of Operator)
NOTE: Hydraulic hoses on Cutter Heads
should be connected so the blades
on the heads (mounted right of the
operator) rotate “clockwise” from
above, according to the following
illustrations.
Refer to your Parts Manual for
correct hardware, hose lengths, and
hydraulic schematics.
LS System/Depth Command
Assembly
1. Install the LS Sensor Mount Weldment
with the two Nylon Washers in the for-
ward-most hole of the Tool Bar.
2. Install the LS Sensor Mount Weldment to
the Sensor Mount (located on the sup-
port arm).
3. Install the Cable Assembly according to
the wiring diagram provided in your Parts
Manual.
Blade Rotation - Left of Operator
(Three-Head Series)
-Typical View
Front
Blade Rotation - Right of Operator
(Two-Head Series)
-Typical View
Check Valve
Front
Blade Rotation - Right of Operator
(Three-Head Series)
-Typical View
Front
• Nylon
Washers
• Tool Bar
• LS Sensor
Mount
Weldment
• Depth
Command
Actuator
• Sensor Arm
Pivot Bolt
-Typical View