Hagie 204SP, Руководство оператора, Страница: 34 / 127

SECTION 3 –
CAB
3-8
Refer to “Engine Monitor” provided in the
Engine and Drive Systems Section
elsewhere in this manual, as well as the
manufacturer’s operation manual for
complete operating instructions and
programming information.
Tasseltrol
®
/LS System 12
™
Control Panel
The Tasseltrol/LS System 12 Control
Panel (located on the side console - lift cover
to access) is used for programming the
detasseling heads.
Refer to the Detasseling Systems Section
elsewhere in this manual for further
information.
Master Detasseler Switch
The detasseling head motors are
controlled by the Master Detasseler Switch
(located on the side console). This switch
must be in the ON position to enable
detasseling head operation.
Refer to the Detasseling Systems Section
elsewhere in this manual for further
information.
Detasseling Head Motor Control
Switches
The Detasseling Head Motor Control
Switches (located on the side console)
activate the detasseling head motors (Lifts
1-6).
Engine Monitor
(Located near the front of operator’s station)
-Typical View
Tasseltrol/LS System 12 Control Panel
(Located on the side console
- lift cover to access)
-Typical View
Master Detasseler Switch
(Located on the side console)
-Typical View