Hagie 204SP, Руководство оператора, Страница: 80 / 127

SECTION 8 –
MAINTENANCE AND STORAGE
8-3
• When finished filling, release pump han-
dle and disconnect quick-connect fitting
from fill port.
• Reinstall fill port rubber end cap.
Method 2 - Filling Through Hydraulic
Return Filter Housing
• Using a 1/2” wrench, remove the four (4)
bolts (located on top of the hydraulic
return filter housing) and set aside.
• Lift edge of housing cover and maneuver
toward rear side of access opening.
Remove cover and set aside.
• Fill reservoir until oil level reaches mid-
sight gauge.
• When finished filling, reinstall hydraulic
return filter housing cover and bolts.
Type
Premium hydraulic fluids containing high
quality rust, oxidation, and foam inhibitors
are required. Hagie Manufacturing Company
recommends Mobilfluid® 424 (complying
with ISO 11158, type HM/HV, VG 46
specifications).
Wheel Hub Oil
Torque Hub ®
Each wheel hub should maintain an oil
level of half-full at all times. Less than that
would limit lubrication and overfilling would
cause overheating and machine damage.
To check the oil level:
NOTE: Check wheel hub oil level every 100
hours of operation.
1. Position wheel hub so one of the drain
plugs is positioned at 12 o’clock. The
other plug will be positioned at either
9 o’clock or 3 o’clock. See following illus-
tration.
2. Remove the bottom plug.
If no oil comes out, the oil level is too
low.
NOTE: Hagie Manufacturing Company
recommends Mobil Delvac ™
synthetic gear oil (75W-90) with EP
features (complying with API GL-5/
MT-1 specifications).
Filling Tank Through Hydraulic Oil Fill Port
-Typical View
Filling Tank Through Hydraulic
Return Filter Housing
-Typical View