H3C SOHO IE4300, Справочник по командам

Страница: 281 / 3296

57
Predefined user roles
network-admin
Parameters
time
: Specifies the schedule execution time in the hh:mm format. The value range for hh is 0 to 23.
The value range for mm is 0 to 59.
date
: Specifies the schedule execution date in the MM/DD/YYYY or YYYY/MM/DD format. The
value range for YYYY is 2000 to 2035. The value range for MM is 1 to 12. The value range for DD
varies by month.
Usage guidelines
The specified time (date plus time) must be later than the current system time.
The
time at
command, the
time once
command, and the
time repeating
command
overwrite one another. The most recently executed command takes effect.
Examples
# Configure the device to execute schedule saveconfig at 01:01 a.m. on May 11, 2015.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time at 1:1 2015/05/11
Related commands
scheduler schedule
time once
Use
time once
to specify one or more execution days and the execution time for a non-periodic
schedule.
Use
undo time
to delete the execution day and time configuration for a non-periodic schedule.
Syntax
time once at time [ month-date month-day | week-day week-day &<1-7> ]
time once delay time
undo time
Default
No execution time or day is specified for a non-periodic schedule.
Views
Schedule view
Predefined user roles
network-admin
Parameters
at time
: Specifies the execution time in the hh:mm format. The value range for hh is 0 to 23. The
value range for mm is 0 to 59.
month-date month-day
: Specifies a day in the current month, in the range of 1 to 31. If you
specify a day that does not exist in the current month, the configuration takes effect on that day in the
next month.
week-day week-day &<1-7>
: Specifies a space-separated list of up to seven week days for the
schedule. Valid week day values include Mon , Tue , Wed , Thu , Fri , Sat , and Sun .