H3C SOHO IE4300, Справочник по командам

Страница: 2778 / 3296

1
Track commands
delay
Use
delay
to set the period of time that the Track module must wait before notifying the application
module of track entry state changes.
Use
undo delay
to remove the notification delay configuration.
Syntax
delay { negative negative-time | positive positive-time } *
undo delay
Default
The Track module notifies the application module immediately when the track entry state changes.
Views
Track view
Predefined user roles
network-admin
Parameters
negative negative-time : Specifies the delay for notifying the application module that the track
entry state has changed to Negative. The
negative-time
argument represents the negative state
notification delay in the range of 1 to 300 seconds.
positive positive-time
: Specifies the delay for notifying the application module that the track
entry state has changed to Positive. The
positive-time
argument represents the positive state
notification delay in the range of 1 to 300 seconds.
Usage guidelines
If the Track module immediately notifies the application module of a track entry state change but
route convergence is not complete, a communication failure might occur. To address this issue, you
can set a notification delay to avoid immediate notification of track entry state changes.
The notification delay settings do not take effect if the track entry is not associated with an application
module.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the negative state notification delay to 50 seconds and the positive state notification delay to
120 seconds for track entry 101 associated with a Boolean OR list.
<Sysname> system-view
[Sysname] track 101 list boolean or
[Sysname-track-101] delay negative 50 positive 120
Related commands
track bfd
track cfd
track interface
track ip route reachability