2
Examples
# Access the
test
directory after logging in to the device.
<Sysname> cd test
# Change to the parent directory.
<Sysname> cd ..
copy
Use
copy
to copy a file.
Syntax
In non-FIPS mode:
copy source-file
{
dest-file
|
dest-directory
}
[
vpn-instance
vpn-instance-name
]
[
source interface
interface-type interface-number
]
In FIPS mode:
copy source-file
{
dest-file
|
dest-directory
}
Views
User view
Predefined user roles
network-admin
Parameters
source-file
: Specifies the name or URL of the file to be copied in non-FIPS mode, and specifies
the name of the file to be copied in FIPS mode. If the file resides on a remote file server rather than
on the device, specify the URL of the file. Whether a URL is case sensitive depends on the server.
dest-file
: Specifies the name or URL for the destination file in non-FIPS mode, and specifies the
name for the destination file in FIPS mode. To copy the source file to a remote file server, specify a
URL. Whether a URL is case sensitive depends on the server.
dest-directory
: Specifies the destination directory or URL in non-FIPS mode, and specifies the
destination directory in FIPS mode. To copy the source file to a remote file server, specify a URL. The
device copies the source file to the destination location and saves the file with its original file name.
Whether a URL is case sensitive depends on the server.
vpn-instance vpn-instance-name
: Specifies the MPLS L3VPN instance to which the
destination remote file server belongs. The
vpn-instance-name
argument represents the VPN
instance name, a case-sensitive string of 1 to 31 characters. If the server belongs to the public
network, do not specify this option.
source interface
interface-type interface-number
: Specifies the source interface
used to connect to the server. After you specify the source interface, the device uses the primary IP
address of the source interface as the source IP address for outgoing packets. If you do not specify
this option, the device uses the outgoing interface as the source interface.
Usage guidelines
In FIPS mode, the
copy
command can only copy a local file and save it locally.
In non-FIPS mode, you can use the
copy
command to perform the following tasks:
•
Copy a local file and save it locally.
•
Copy a local file and save it to an FTP, TFTP, or HTTP server.
•
Copy a file from an FTP, TFTP, or HTTP server and save it locally.
Содержание SOHO IE4300
