22
[Sysname] interface loopback 0
[Sysname-LoopBack0] ip address 2.2.2.2 32
[Sysname-LoopBack0] quit
[Sysname] info-center loghost source loopback 0
info-center security-logfile alarm-threshold
Use
info-center security-logfile alarm-threshold
to set the alarm threshold for
security log file usage.
Use
undo info-center security-logfile alarm-threshold
to restore the default.
Syntax
info-center security-logfile alarm-threshold
usage
undo info-center security-logfile alarm-threshold
Default
The alarm threshold for security log file usage is 80. When the usage of the security log file reaches
80%, the system outputs a message to inform the administrator.
Views
System view
Predefined user roles
network-admin
Parameters
usage
: Specifies an alarm threshold. The value must be an integer in the range of 1 to 100.
Usage guidelines
When the security log file is full, the system deletes the oldest logs and then writes new logs to the
security log file. This feature helps avoid security log loss by setting an alarm threshold for the
security log file usage. When the threshold is reached, the system outputs log information to inform
the administrator. The administrator can log in to the device with the security-audit user role and back
up the security log file.
Examples
# Set the alarm threshold for security log file usage to 90.
<Sysname> system-view
[Sysname] info-center security-logfile alarm-threshold 90
Related commands
info-center security-logfile size-quota
info-center security-logfile directory
Use
info-center security-logfile directory
to specify the security log file directory.
Syntax
info-center security-logfile directory dir-name
Default
The security log file is saved in the
flash:/seclog
directory.
Содержание SOHO IE4300
