H3C SOHO IE4300, Справочник по командам

Страница: 2789 / 3296

12
Route management does not immediately notify the Track module of the route status changes when
the following conditions are met:
•
An active/standby device switchover or a RIB process switchover has occurred.
•
The status of the monitored route entry is changed before the routing protocol completes the
graceful restart.
You can resolve the problem by configuring the nonstop routing feature.
Examples
# Create track entry 1 to monitor the status of the route entry 10.1.1.0/24.
<Sysname> system-view
[Sysname] track 1 ip route 10.1.1.0 24 reachability
[Sysname-track-1]
Related commands
delay
display ip route
( Layer 3—IP Routing Command Reference )
display track
track lldp neighbor
Use
track lldp neighbor
to create a track entry associated with the neighbor availability status
of an LLDP interface and enter Track view, or enter the view of an existing track entry.
Use
undo track
to remove the track entry and all its settings.
Syntax
track track-entry-number lldp neighbor interface interface-type
interface-number
undo track track-entry-number
Default
No track entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
track-entry-number
: Specifies the track entry ID in the range of 1 to 1024.
interface interface-type interface-number
: Specifies an LLDP interface by its type
and number.
Usage guidelines
To create a track entry, you must specify the tracked object type, which is
lldp neighbor
in this
command.
To enter the view of an existing track entry, use the
track track-entry-number
command. The
tracked object type is not required.
To modify the settings for a track entry, execute the
undo track
command to remove the track
entry, and then execute the
track lldp neighbor
command again.