65
Parameters
ip-address
: Specifies the source IP address.
interface
interface-type interface-number
: Uses the IP address of an interface as the
source IP address. The
interface-type interface-number
arguments specify an interface
by its type and number.
Usage guidelines
This command is required if multiple relay interfaces share the same IP address or if a relay interface
does not have routes to DHCP servers. You can use this command to specify the IP address of
another interface, typically the loopback interface, on the DHCP relay agent as the source IP
address for DHCP requests. The relay interface inserts the source IP address in the source IP
address field as well as the
giaddr
field in DHCP requests.
If multiple relay interfaces share the same IP address, you must also configure the relay interface to
support Option 82. Upon receiving a DHCP request, the relay interface inserts the subnet
information in sub-option 5 in Option 82. The DHCP server assigns an IP address according to
sub-option 5. The DHCP relay agent looks the output interface up in the MAC address table to
forward the DHCP reply.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify 1.1.1.1 as the source IP address for relayed DHCP requests on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] dhcp relay source-address 1.1.1.1
Related commands
dhcp select relay
dhcp smart-relay enable
Use
dhcp smart-relay enable
to enable the DHCP smart relay feature.
Use
undo dhcp smart-relay enable
to disable the DHCP smart relay feature.
Syntax
dhcp smart-relay enable
undo dhcp smart-relay enable
Default
The DHCP smart relay feature is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The smart relay feature allows the relay agent to use secondary IP addresses as the gateway
address when the DHCP server does not reply the DHCP-OFFER message. The relay agent initially
inserts its primary IP address in the
giaddr
field before forwarding a request to the DHCP server. If
no DHCP-OFFER is returned after two retries, the relay agent switches to secondary IP addresses.
Without this feature, the relay agent always uses the primary IP address as the gateway address.
Содержание SOHO IE4300
