1
Device management commands
alarm-port event
Use
alarm-port event
to specify an alarm event for the alarm ports.
Use
undo alarm-port event
to restore the default.
Syntax
alarm-port slot
slot-number1
[
to
slot-number2
]
event
{
alarm-in
port-in
port-number
|
cpu-usage
|
loop
|
power-lost
|
reboot
}
port-out
port-number-list
undo
alarm-port slot
slot-number1
[
to
slot-number2
]
event
{
alarm-in
port-in
port-number
|
cpu-usage
|
loop
|
power-lost
|
reboot
}
port-out
port-number-list
Default
No alarm events are specified for alarm ports.
Views
System view
Predefined user roles
network-admin
Parameters
alarm-in
port-in
port-number
: Issues an alarm upon receiving an alarm from an alarm input
port. The
port-number
argument specifies the alarm input port, which is fixed at 1. The
IE4300-12P-PWR-M switch does not support the
alarm-in
port-in
port-number
option.
cpu-usage
: Issues an alarm when a CPU usage alarm threshold is exceeded on the device. Only
the IE4300-28P-M and IE4300-12P-PWR-M switches support the
cpu-usage
keyword.
loop
: Issues an alarm when a loop is detected on the device. To monitor this type of alarm, you must
enable loop detection. For more information about loop detection, see
Layer 2—LAN Switching
Configuration Guide
.
power-lost
: Issues an alarm when a power module stops providing power. Only the
IE4300-28P-M switch supports the
power-lost
keyword.
reboot
: Issues an alarm when a warm reboot occurs on the device.
port-out
port-number-list
: Sends an alarm out of a set of alarm output ports. The
port-number-list
argument specifies a space-separated list of up to 10 alarm output port items,
which is fixed at 1. An item specifies an alarm output port by its number or specifies a range of alarm
output ports in the form of
start-port-number
to
end-port-number
. The end port number
must be equal to or greater than the start port number.
slot
slot-number1
[
to
slot-number2
]
: Specifies a single IRF member device or a range
of IRF member devices by member ID. The
slot-number2
argument must be greater than the
slot-number1
argument.
Usage guidelines
The alarm output port of the device can output alarms for the following alarm events:
•
Local alarm events, including:
A CPU usage alarm threshold is exceeded.
Содержание SOHO IE4300
