H3C SOHO IE4300, Справочник по командам

Страница: 2785 / 3296

8
Usage guidelines
To create a track entry, you must specify the tracked object type, which is
cfd
in this command.
To enter the view of an existing track entry, use the track track-entry-number command. The
tracked object type is not required.
To modify the settings of a track entry, execute the undo track command to remove the track entry,
and then execute the track cfd command again.
Examples
# Create track entry 1 and specify the CFD service instance ID as 2 and MEP ID as 3.
<Sysname> system-view
[Sysname] track 1 cfd cc service-instance 2 mep 3
[Sysname-track-1]
Related commands
cfd mep
cfd service-instance
delay
display track
track interface
Use
track interface
to create a track entry associated with the link state of an interface and
enter Track view, or enter the view of an existing track entry.
Use
undo track
to remove the track entry and all its settings.
Syntax
track track-entry-number interface interface-type interface-number
undo track track-entry-number
Default
No track entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
track-entry-number
: Specifies the track entry ID in the range of 1 to 1024.
interface-type interface-number
: Specifies an interface by its type and number.
Usage guidelines
To create a track entry, you must specify the tracked object type, which is
interface
in this
command.
To enter the view of an existing track entry, use the
track track-entry-number
command. The
tracked object type is not required.
When you associate Track with interface management to monitor the link status of an interface, the
track entry state changes as follows: