61
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
interval
interval-value
: Specifies the interval at which the device sends register packets to
the portal authentication server, in seconds. The value range for the
interval
argument is 1 to
3600, and the default value is 600.
Usage guidelines
This feature is typically used in scenarios where a NAT device exists between a portal authentication
server and a large number of access devices.
If this feature is disabled, you must configure a static NAT mapping for each access device on the
NAT device. If this feature is enabled, the access device automatically sends a register packet to the
portal authentication server. When the server receives the register packet, it records register
information for the access device, including the device name and the IP address and port number
after NAT. The register information is used for subsequent authentication information exchanges
between the server and the access device. The access device updates its register information on the
server by sending register packets at regular intervals.
This feature can work with only CMCC portal authentication servers.
Examples
# Configure the device to send register packets to portal authentication server
pts
at intervals of 120
seconds.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] server-register interval 120
Related commands
server-type
server-type (portal authentication/Web server view)
Use
server-type
to specify the type of a portal authentication server or portal Web server.
Use
undo server-type
to restore the default.
Syntax
server-type
{
cmcc
|
imc
}
undo server-type
Default
The type of the portal authentication server and portal Web server is IMC.
Views
Portal authentication server view
Portal Web server view
Predefined user roles
network-admin
Содержание SOHO IE4300
