H3C SOHO IE4300, Справочник по командам

Страница: 1203 / 3296

2
Syntax
area area-id
undo area area-id
Default
No OSPF areas exist.
Views
OSPF view
Predefined user roles
network-admin
Parameters
area-id
: Specifies an area by its ID, an IP address or a decimal integer in the range of 0 to
4294967295 that is translated into the IP address format.
Examples
# Create Area 0 and enter Area 0 view.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0]
asbr-summary (OSPF view)
Use asbr-summary to configure route summarization on an ASBR.
Use
undo asbr-summary
to remove the configuration.
Syntax
asbr-summary ip-address { mask-length | mask } [ cost cost-value |
not-advertise | nssa-only | tag tag ] *
undo asbr-summary ip-address { mask-length | mask }
Default
Route summarization is not configured on an ASBR.
Views
OSPF view
Predefined user roles
network-admin
Parameters
ip-address : Specifies the destination IP address of the summary route.
mask-length : Specifies the mask length in the range of 0 to 32.
mask
: Specifies the mask in dotted decimal notation.
cost cost-value
: Specifies the cost of the summary route, in the range of 1 to 16777214. If you
do not specify this option, the largest cost among the summarized routes applies. If the routes in
Type-5 LSAs translated from Type-7 LSAs are Type-2 external routes, the largest cost among the
summarized routes plus 1 applies.