23
Use
undo vrrp
vrid preempt-mode
to disable the preemptive mode for the device in an IPv4
VRRP group.
Use
undo vrrp vrid preempt-mode delay
to restore the default preemption delay.
Syntax
vrrp vrid
virtual-router-id
preempt-mode
[
delay
delay-value
]
undo
vrrp vrid
virtual-router-id
preempt-mode
[
delay
]
Default
The device operates in preemptive mode and the preemption delay is 0 centiseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id
: Specifies an IPv4 VRRP group by its virtual router ID. The value range for
the
virtual-router-id
argument is 1 to 255.
delay
delay-value
: Specifies the preemption delay in the range of 0 to 180000 in centiseconds.
Usage guidelines
In non-preemptive mode, the master router acts as the master as long as it operates correctly, even
if a backup is assigned a higher priority later. The non-preemptive mode helps avoid frequent
switchover between the master and backups.
In preemptive mode, a backup sends VRRP advertisements when it detects that it has a higher
priority than the master. Then the backup takes over as the master and the previous master
becomes a backup. This mechanism ensures that the master is always the device with the highest
priority.
You can configure the VRRP preemption delay for the following purposes:
•
Avoid frequent state changes among members in a VRRP group.
•
Provide the backups with enough time to collect information (such as routing information).
A backup does not immediately become the master after it receives an advertisement with a lower
priority than the local priority. Instead, it waits for a period of time before taking over as the master.
Examples
# Enable the preemptive mode for the device in VRRP group 1, and set the preemption delay to 5000
centiseconds.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 preempt-mode delay 5000
Related commands
display
vrrp
vrrp vrid priority
Use
vrrp
vrid priority
to set the priority of the device in an IPv4 VRRP group.
Use
undo vrrp
vrid priority
to restore the default.
Содержание SOHO IE4300
