H3C SOHO IE4300, Справочник по командам

Страница: 626 / 3296

13
Field Description
Link aggregation supported Indicates whether link aggregation is supported.
Link aggregation enabled Indicates whether link aggregation is enabled.
Aggregation port ID Member port ID, which is 0 when link aggregation is disabled.
Auto-negotiation supported Indicates whether autonegotiation is supported on the port.
Auto-negotiation enabled Indicates whether autonegotiation is enabled on the port.
OperMau Speed and duplex state on the port.
Power port class
PoE port class:
•
PSE —Power sourcing equipment.
•
PD —Powered device.
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the pair selection ability is available.
Power pairs
Power supply mode:
•
Signal —Uses data pairs to supply power.
•
Spare —Uses spare pairs to supply power.
Port power classification
Power class of the PD:
•
Class 0.
•
Class 1.
•
Class 2.
•
Class 3.
•
Class 4.
Power type
Power supply type:
•
Type 1 PD.
•
Type 2 PD.
•
Type 1 PSE.
•
Type 2 PSE.
Power source
Power source:
•
When the power supply type is PSE, options are:

Unknown —Unknown power supply.

Primary —Primary power supply.

Backup —Backup power supply.

Reserved .
•
When the power supply type is PD, options are:

Unknown —Unknown power supply.

PSE —PSE power supply.

Local —Local power supply.

PSE and local —PSE and local power supplies.
Power priority
•
Unknown.
•
Critical.
•
High.
•
Low.
PD requested power value 2-pair single-signature PD requested power in watts.
PSE allocated power value 2-pair single-signature PSE allocated power in watts.
PD requested power value mode A This field is supported only on the UPWR switches.