H3C SOHO IE4300, Справочник по командам

Страница: 1882 / 3296

101
weight weight-value
: Specifies a weight value for the RADIUS server. The value range for the
weight-value argument is 0 to 100, and the default value is 0. The value 0 indicates that the
RADIUS server will not be used for load sharing. This option takes effect only when the RADIUS
server load sharing feature is enabled for the RADIUS scheme. A larger weight value represents a
higher capacity to process accounting requests.
Usage guidelines
Make sure the port number and shared key settings of each secondary RADIUS accounting server
are the same as those configured on the corresponding server.
A RADIUS scheme supports a maximum of 16 secondary RADIUS accounting servers. If the primary
server fails, the device tries to communicate with a secondary server in active state. The device
connects to the secondary servers in the order they are configured.
Two accounting servers specified for a scheme, primary or secondary, cannot have identical VPN
instance, host name, IP address, and port number settings.
The shared key configured by this command takes precedence over the shared key configured with
the
key accounting
command.
If the specified server resides on an MPLS L3VPN, specify the VPN instance by using the
vpn-instance vpn-instance-name
option. The VPN instance specified by this command
takes precedence over the VPN instance specified for the RADIUS scheme.
If you use the
secondary accounting
command to modify or delete a secondary accounting
server to which the device is sending a start-accounting request, communication with the secondary
server times out.
•
When the RADIUS server load sharing feature is disabled, the device tries to communicate with
an active server that has the highest priority for accounting.
•
When the RADIUS server load sharing feature is enabled, the device returns an accounting
failure message rather than searching for another active accounting server.
If you remove an actively used accounting server, the device no longer sends users' real-time
accounting requests and stop-accounting requests. The device does not buffer the stop-accounting
requests, either.
Examples
# In RADIUS scheme radius1 , specify a secondary accounting server with IP address 10.110.1.1
and UDP port 1813.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
# In RADIUS scheme radius2 , specify two secondary accounting servers with IP addresses
10.110.1.1 and 10.110.1.2 and UDP port 1813.
<Sysname> system-view
[Sysname] radius scheme radius2
[Sysname-radius-radius2] secondary accounting 10.110.1.1 1813
[Sysname-radius-radius2] secondary accounting 10.110.1.2 1813
Related commands
display radius scheme
key
(RADIUS scheme view)
primary accounting
(RADIUS scheme view)
vpn-instance
(RADIUS scheme view)