H3C SOHO IE4300, Справочник по командам

Страница: 2654 / 3296

10
ring ring-id-list
: Specifies a space-separated list of up to 10 RRPP subring ID items. Each
item specifies an RRPP subring ID or a range of RRPP subring IDs. The value range for RRPP
subring IDs is 1 to 128. If you do not specify this option, the command removes all subrings from the
ring group in the specified domain.
Usage guidelines
Follow these guidelines when you configure an RRPP ring group on the edge node and the assistant
edge node:
•
When you assign an active ring to a ring group, assign it on the assistant edge node first and
then on the edge node.
•
To remove an active ring from a ring group, remove it on the edge node first and then on the
assistant edge node.
•
To remove a ring group, remove it on the edge node first and then on the assistant edge node.
•
When you activate rings in a ring group, activate them on the edge node first and then on the
assistant edge node.
•
When you deactivate rings in a ring group, deactivate them on the assistant edge node first and
then on the edge node.
If you do not follow these guidelines, the assistant edge node might fail to receive Edge-Hello
packets and consider the primary ring failed even if it did not.
Examples
# Create RRPP ring group 1, and add subrings 1, 2, 3, and 5 to domain 1 and domain 2.
<Sysname> system-view
[Sysname] rrpp ring-group 1
[Sysname-ring-group1] domain 1 ring 1 to 3 5
[Sysname-ring-group1] domain 2 ring 1 to 3 5
Related commands
display rrpp ring-group
rrpp ring-group
linkup-delay-timer
Use linkup-delay-timer to set the link-up delay timer.
Use undo linkup-delay-timer to restore the default.
Syntax
linkup-delay-timer delay-time [ distribute ]
undo linkup-delay-timer
Default
The link-up delay timer is 0 seconds, and the
distribute
keyword is not specified.
Views
RRPP domain view
Predefined user roles
network-admin
Parameters
delay-time
: Specifies the link-up delay timer in the range of 0 to 30 seconds.