25
Syntax
flow-interval interval
undo flow-interval
Default
The statistics polling interval is 300 seconds.
Views
System view
Ethernet interface view
Predefined user roles
network-admin
Parameters
interval
: Sets the statistics polling interval in seconds. The interval is in the range of 5 to 300 and
must be a multiple of 5.
Usage guidelines
A device supports either the system view settings or the Ethernet interface view settings.
•
The statistics polling interval configured in system view takes effect on all Ethernet interfaces.
•
The statistics polling interval configured in Ethernet interface view takes effect only on the
current interface.
For an Ethernet interface, the statistics polling interval configured in Ethernet interface view takes
priority.
As a best practice, use the default setting when you set the statistics polling interval in system view.
A short statistics polling interval might decrease the system performance and result in inaccurate
statistics.
Examples
# Set the statistics polling interval to 100 seconds on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] flow-interval 100
ifmonitor crc-error
Use
ifmonitor crc-error
to configure global CRC error packet alarm parameters.
Use
undo ifmonitor crc-error
to restore the default.
Syntax
ifmonitor crc-error slot
slot-number
high-threshold
high-value
low-threshold
low-value
interval
interval
[
shutdown
]
undo ifmonitor crc-error slot
slot-number
Default
The upper threshold is 1000, the lower threshold is 100, and the statistics collection and comparison
interval is 10 seconds for CRC error packet alarms.
Views
System view
Содержание SOHO IE4300
