H3C SOHO IE4300, Справочник по командам

Страница: 205 / 3296

22
Examples
# Delete the main next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash: is being cleared.
Please wait ...........
Configuration file is cleared.
Related commands
display saved-configuration
restore startup-configuration
Use
restore startup-configuration
to download a configuration file from a TFTP server
and specify it as the main next-startup configuration file.
Syntax
restore startup-configuration from { ipv4-server | ipv6 ipv6-server }
src-filename [ vpn-instance vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv4-server
: Specifies a TFTP server by its IPv4 address or host name. The host name is a
case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
ipv6 ipv6-server : Specifies a TFTP server by its IPv6 address or host name. The host name is
a case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
src-filename
: Specifies the name of the configuration file to be downloaded. The file must be
a .cfg file. The file name is a case-insensitive string of up to 255 characters.
vpn-instance vpn-instance-name
: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If the TFTP server is on the public network, do not specify
this option.
Usage guidelines
This command is not supported in FIPS mode.
Before restoring the configuration file for the next startup, make sure the following requirements are
met:
•
The server is reachable.
•
The server is enabled with TFTP service.
•
You have read and write permissions to the server.
This command downloads the configuration file to the root directory of the default storage medium on
each member device and specifies the file as the main next-startup configuration file. If a partitioned
USB disk is used as the default storage medium, the configuration file is saved on the first partition.
Make sure all IRF members use the same type of default storage media. If a subordinate device uses
a different type of default storage medium than the master, the command cannot propagate the