H3C SOHO IE4300, Справочник по командам

Страница: 95 / 3296

40
string
: Specifies the password. Its hashed form is a case-sensitive string of 1 to 110 characters.
its plaintext form is a case-sensitive string of 4 to 16 characters, and must contain a minimum of two
character types.
Usage guidelines
This command is not supported in FIPS mode.
Only users assigned the network-admin, or level-15 user role can execute this command. Other
users cannot execute this command, even if they are granted the right to execute this command.
This command is available in both user line view and user line class view. A non-default setting in
either view takes precedence over a default setting in the other view. A non-default setting in user
line view takes precedence over a non-default setting in user line class view.
A password change does not take effect for the current session. It takes effect for subsequent login
sessions.
Examples
# Set the password to hello12345 for local password authentication on VTY line 0.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] authentication-mode password
[Sysname-line-vty0] set authentication password simple hello12345
Related commands
authentication-mode
shell
Use
shell
to enable the terminal service for user lines.
Use
undo shell
to disable the terminal service for user lines.
Syntax
shell
undo shell
Default
The terminal service is enabled on all user lines.
Views
User line view
User line class view
Predefined user roles
network-admin
Usage guidelines
The undo shell command is not supported in AUX line view or AUX line class view.
You cannot disable the terminal service on the user line you are using.
When the device acts as a Telnet or SSH server, you cannot execute the undo shell command.
If the
undo shell
command is executed in user line class view, you cannot execute the
shell
command in the view of a user line in the class.