![background image](http://html.mh-extra.com/html/h-p-cosmos/arsalis-gaitway-3d/arsalis-gaitway-3d_service-manual_574521090.webp)
gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : 86
Test Step
Measurements/Test Results
Seq.
No.
Description
Required/No
minal (incl.
tolerance)
Measured/
Calculated
Remarks/Calculations
Pass/
No
pass
11.
Dismount both, left and right, handrail
supports from foot plates and set screws and
washers aside.
12.
Mount left and right handrail on the treadmill
beams using the screws set aside at
step
13.
Un-route cable from load cell to replace to
the force amplifier. Leave the cable to the
other load cell on the same side routed
loosely towards amplifier.
14.
Place two Treadmill-spacer-back (height of
70-72mm) on the treadmill foot plates, under
the
BACK
of the treadmill beams.
Spacers at:
BACK
2x Treadmill-spacer-back