![background image](http://html.mh-extra.com/html/h-p-cosmos/arsalis-gaitway-3d/arsalis-gaitway-3d_service-manual_574521002.webp)
gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : II
This service manual is only valid for the software / firmware version noted on the first
page of this manual and only for the original configuration of the first delivery of the
machine. Firmware updates, software updates, changes of the system configuration
or retrofitting of additional equipment or accessories can result in invalidity of this
manual. In case of alterations of the device or the additional equipment; the latest
version of the manual or the corresponding additional information always should be
considered.
The service manual for the gaitway-3D 150/50, gaitway-3D 170/65 and gaitway-3D
190/65 systems is split in two parts: the present manual covers all service instruction
and safety precautions for the
instrumentation
of the gaitway-3D instrumentation;
the service instructions and safety precaution for the gaitway-3D
treadmill
are
described in the instructions for use of the h/p/cosmos treadmill ergometer.
Throughout this manual, the sign below indicates instances where you should consult
the gaitway-3D treadmill service manual.
The present manual only covers the service relative to the gaitway-3D
instrumentation. More safety notes, warnings, precautions, service
instructions are available
in the instructions for use of the h/p/cosmos treadmill ergometer. Please
refer to the manual available at the address below:
https://www.hpcosmos.com/en/contact-support/media-downloads/manuals
All operations described in this manual, such as installation, commissioning, part
replacement and repair work, are to be carried out only by trained and authorized
technicians who have been certified by Arsalis. Customers must not perform these
kinds of tasks.
We recommend calling our competent service team or entering into a maintenance
contract for a routine service at an interval of 6 or 12 months for standard machines
and standard applications.
It is strictly forbidden to perform any amendments of the technical
design, technical specifications, labelling and configurations (except
allowed programming as described in this manual) of this machine
and the software and accessories connected to this machine.
Any amendments, unauthorized, poor or lack of service /
maintenance will result in loss of manufacturer’s liability and
warranty.