gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : 38
Test Step
Measurements/Test Results
Seq.
No.
Description
Required/No
minal (incl.
tolerance)
Measured/
Calculated
Remarks/Calculations
Pass/
No
pass
51.
Before connecting the amplifier power cable,
switch on treadmill and measure the power
supply to the force amplifier between ground
(pin3) and 12V (pin1) of the power inlet
cable. Then switch off the treadmill and
remove main plug.
Force amplifier
supply (V):
11.88 ≤ 12
≤12.12
52.
Confirm that the power cable and speed
sensor cable cannot touch sharp edges or
moving parts.
53.
Load cell cable preparation