h/p/cosmos Arsalis Gaitway 3D, Руководство по обслуживанию

Страница: 30 / 108

gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS Iss.: A Rev.: 9 Date: 07/12/2020 Page : 26
Test Step Measurements/Test Results
Seq.
No. Description Required/No
minal (incl.
tolerance) Measured/
Calculated Remarks/Calculations Pass/
No
pass
22. Check that the Treadmill-spacer-back parts
are present at the
BACK of the treadmill and
lay down the treadmill on the holes, BACK
side first.
Spacers at:
BACK
First side
down: BACK Spacers at:
First side
down:
23. Remove the Treadmill-spacer-back.
24. If the treadmill is installed with a wooden-
board, skip this step and perform steps
25
and
26.
Screw the treadmill to the floor.
For mechanical anchorages, torque screws
at 15Nm.
For chemical anchorages, torque screws at
8Nm.
Torque:
Mech. =
15 Nm
Chemic =
8 Nm
Torque:

26x DIN933-M10x30

26x DIN9021-M10
25. Perfrom this step only if the treadmill is
installed with a wooden-board.
Screw the treadmill to the wooden-board. Torque =
15Nm

26x DIN933-M10x50

26x DIN9021-M10
26. If the treadmill is installed without a wooden-
board, skip steps
25 and 26.
Screw the wooden-board to the floor.
For mechanical anchorages, torque screws
at 15Nm.
For chemical anchorages, torque screws at
8Nm.
Torque:
Mech. =
15 Nm
Chemic =
8 Nm
Torque:

12x DIN933-M10x60

12x DIN9021-M10