![background image](http://html.mh-extra.com/html/h-p-cosmos/arsalis-gaitway-3d/arsalis-gaitway-3d_service-manual_574521076.webp)
gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : 72
Test Step
Measurements/Test Results
Seq.
No.
Description
Required/No
minal (incl.
tolerance)
Measured/
Calculated
Remarks/Calculations
Pass/
No
pass
14.
Set treadmill speed at 10km/h and confirm
that the selected speed is correctly indicated
within 5%:
- on the treadmill control panel in gaitway-3D
software
- on measures speed in DATA panel in
gaitway-3D software
- on optional user terminal
Set speed:
10 km/h
Read speed:
> 9.5 km/h
< 10.5 km/h
TM control
panel
speed:
TM DATA
speed:
TM
user
terminal
speed:
15.
While the treadmill belt is moving at 10 km/h,
control during 2min that the belt stays
centered. Adjust belt tension if necessary.
16.
Stop the belt with the magnet pull rope
switch.
17.
Restart the belt. When the set speed is
reached, stop the belt with the user terminal
emergency stop.
18.
If the optional safety arch is mounted, restart
the belt. When the set speed is reached,
stop the belt with the safety arch emergency
suspension rope.